Caravan Accessories
 
 
RMC Swing Thruster

A propeller transforms motor power into thrust force, which in turn, must overcome the boat's resistance and move it in the required direction in accordance with the laws of nature. But now, when we introduce the completely new and patented swing bow and stern thrusters, designed and developed in Sweden - it's time to think again!

The RMC Swing Thruster performs at 30-50% greater efficiency, lower sound levels and produces minimal cavitation. Last but not least, it does not require a tunnel, which are known to reduce boat speed. The thruster folds up inside the hull when not in use.

Water resistance is minimal and the boat's performance is not affected. All parts are manufactured to the highest marine quality standards - driveline, motor, propeller and hub. Joystick and foot pedals are available as accessories.The range of models are suitable for 25 to 85 foot boats.

 


Freedom of choice

The RMC Swing Thruster preserves the look and performance of your boat because the whole unit disappears into the hull of your boat.

Other brands require installation in a permanently open thruster tunnel.

Marine Refrigeration Parts

 

 


Simple Installation

Marine Tables


The range of RMC Swing Thruster models are suitable for both powerboats and sailboats between 25 and 85 feet and can be installed as both a bow and a stern thruster. Installing the RMC Swing Thruster is simple, but should be carried out by a professional.


 


Facts about the RMC Swing Thruster

 

Product Name
Motor
kg
Box�
kg
Motor
height� (mm)
Sailboat
(feet)�
Powerboat
(feet)
RMC 140 2.2 kW 42 kgf 12volt
10
9
198
25-37
25-30
RMC 185 3.0 kW 58 kgf 12volt
16
16
230
36-42
30-36
RMC 185 3.0 kW 58 kgf 24volt
16
16
230
36-42
30-36
RMC 185 4.0 kW 65 kgf 12volt
16
16
240
40-45
35-40
RMC 185 4.0 kW 65 kgf 24volt
16
16
240
40-45
35-40
RMC 185 5.0 kW 82 kgf 12volt
24
16
270
43-47
38-45
RMC 185 5.0 kW 82 kgf 24volt
24
16
270
43-47
38-45
RMC 185 6.0 kW 97 kgf 12volt
26
16
270
45-54
43-50
RMC 185 6.0 kW 97 kgf 24volt
26
16
270
45-54
43-50
RMC 185 7.0 kW 125 kgf Hydraulic
8
16
155
45-60
45-55
RMC 250 8.0 kW 160 kgf 24volt
41
32
380
55-70
48-60
RMC 250 9.6 kW 220 kgf 24/48 volt
31
32
345
65-80
60-70
RMC 250 15.0 kW 250 kgf Hydraulic
16
32
165
65-85
60-85


 


 

Dimensions


Marine Tap Fittings
 

Dimension mm
A
B
C
D
RMC 140 2.2 kw
269
393
220
610
RMC 185 3.0 kw
308
441
255
729
RMC 185 4.0 kw
309
449
255
738
RMC 185 5-6 kw
315
473
255
767
RMC 185 7.0 kw
315
355
255
652
RMC 250 8.0 kw
403
623
375
1031
RMC 250 9.6 kw
403
600
375
996
RMC 250 15.0 kw
403
450
375
816


 

 


Accessories

 

RMCTOUTCH
Thruster panel on/off, up/down, Port & Starboard push button
RMCJOY
Joystick
L48000170
Electrical foot switch
RMC05M
Cable 5 meter
RMC10M
Cable 10 meter
RMC15M
Cable 15 meter
RMC20M
Cable 20 meter
RMC-Y
Y-Connector




Remote Control And Electronic Box


Normally, you are commited to the rudder and control units in the cockpit when berthing or anchoring. But the fact is you don’t always have the best view of the situation from there. With RMC Marine’s remote control, you have the freedom to be able to precisely manoeuvre using both the Swingthruster and the windlass from wherever you have the best view and control on board.

Marine-customised design with clear, logical keypad

The remote control has been designed to cope with tough marine environments and, of course, it floats if you drop it into the sea. You manoeuvre the boat by operating the boat’s windlass using four large, clear buttons. The remote control communicates via radio waves with a receiver that in turn is linked to the various units. The remote control is suitable for all windlasses with contactors and for the Swingthruster. It is even equipped for the RMC Docking System.

Includes everything you need

The remote control is supplied with a 5 meter cable for the windlass. A belt clip for attaching the remote control is also included. That way you know where it is and can access it quickly.

Technical specification
Item no:          RMCR-SW/AW - remote control, 12/24V
Dimensions:   Remote control W 65 mm D 112 mm H 22 mm
                       Electronics box W 191 mm D 77 mm H 108 mm



 

 
        Bow and stern thrusters
 
 
Boat Accessories
Contact Us  
Name : *
Company : *
Address :
Suburb :
Country :
Postcode / Zip :
Phone : *
Fax :
Mobile :
Email : *
Verification code
   
Please enter the letters or digits
 
Comments :
 
 
HOME     |      ABOUT US     |      BOW AND STERN THRUSTERS     |      WATER HEATERS     |      LAGUN FOLDING TABLES     |      MARINE AND LEISURE     |      NEWS     |      CONTACT US
Copyright © 2010 BCA - BCA Australia – a division of Back’s Marine Pty Ltd. All rights reservcd. Web design Powered by Dreeme.